top of page

SUCTION TOOL USAGE DIRECTIONS

Contents of the package:

IMG_20220316_154813.jpg

1. Cartridge holder

2. Big Rubber for black cartridges

3. Small Rubber for color cartridges

4. Tool adjuster for fitting canon cartridges

1

2

3

4

Usage directions:

IMG_20220316_161716.jpg

Step 1: Fit the rubber here (Small rubber for color, Big for black)

IMG_20220316_163126_edited.jpg

Step 2: Fit the cartridge in suction tool and ensure there is no gap between the rubber and cartridge

IMG_20220316_163455.jpg

Step 3: Put the injection in the back side of the suction tool and suck the air from injection

Gap.jpg

Gap (wrong)

Gap no.jpg

No Gap (right)

If proper pressure is created in the injection, ink will come out and process is complete

If pressure is not created, this means there might be some gap between the cartridge and rubber. Try the options:

Option 1: Try making random adjustments to angle of the cartridge and try the suction

Option 2: Try to press the cartridge by hand against the rubber and suck air from injection then it should work as shown here

IMG_20220316_172115.jpg

Press the cartridge against rubber by applying force with hand

For canon cartridges

Repeat the same steps as above after fitting the tool adjuster on cartridge holder as shown in the image

st only.jpg
TA only.jpg
IMG_20220316_174802.jpg
logo.png

Any Queries? Feel free to get in touch with us.

Celestial Colors Pvt Ltd

C-176, Okhla Industrial Area, Phase - 1, New Delhi - 110 020

+91 11 4154 4258
+91 85952 17570

Connect with us

Disclaimer :  All brand names and trademarks are properties of their respective owners. They are mentioned only to describe compatibility of our product on their printers and cartridges. We are not responsible for any indirect, consequential, incidental loss or damage. Our warranty is limited to the replacement of product only.”

bottom of page